Square and Point Cutter – High Speed Steel (RS220)

One of two double ended chattertool cutters that will produce a myriad of decorative patterns. Alternative patterns can be created by adjusting cutter lengths, alternating between cutter shapes, changing lathe speeds, using traverse or stationary cuts and by making cuts on, above or below centre. To be produced on end grain only.

Sharpening:
Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often.

Related Products:
This cutter is designed for use with the following tools:

  • RS2000 Deep Hollowing System
  • Chattertool (RS215KT, RS216)

For more information:

  • Download our sharpening guide here
  • Watch the Robert Sorby film on sharpening hints and tips
  • Look at our guide to sharpening abrasives
Categories: , , ,
Find a Stockist
SKU Code Description/Type Cat Page Number
RS220 Square/Pointed Chattertool Cutter

Robert Sorby tool sets now come with a lifetime guarantee.

Simply follow the link below and complete the registration form, ensuring that you include the set’s registration number. You will find this on the warranty card that came with your tool set. Note: this warranty does not cover wear through natural usage or damage caused by misuse or negligence.

Please retain your receipt as proof of purchase.

Register your product

Related products